debug = false;
/**
* Enable debug mode if condition is met
*
* Set debug mode to be false above, and then specify any one of the following here:
* 1) IP address of user required to enable debug mode;
* 2) Your own callable function name (i.e. "debug_mode") in /site/config.php that returns
* true or false for debug mode;
* 3) PCRE regular expression to match IP address of user (must start and end with a "/"
* slash). If IP address matches, then debug mode is enabled. Regular expression
* example: /^123\.456\.789\./ would match all IP addresses that started with 123.456.789.
*
* #notes When used, this overrides $config->debug, changing it at runtime automatically.
* @var string
*
*/
$config->debugIf = '';
/**
* Tools, and their order, to show in debug mode (admin)
*
* Options include: pages, api, session, modules, hooks, database, db, timers, user, input, cache, autoload
*
* @var array
*
*/
$config->debugTools = array(
'pages',
'api',
'session',
'modules',
'hooks',
'database', // PDO
'db', // mysqli
'timers',
'user',
'input',
'cache',
'autoload',
);
/**
* Enable ProcessWire advanced development mode?
*
* Turns on additional options in ProcessWire Admin that aren't applicable in all instances.
* Be careful with this as some options configured in advanced mode cannot be removed once
* set (at least not without going directly into the database).
*
* #notes Recommended mode is false, except occasionally during ProcessWire core or module development.
* @var bool
*
*/
$config->advanced = false;
/**
* Enable demo mode?
*
* If true, disables save functions in Process modules (admin).
*
* @var bool
*
*/
$config->demo = false;
/**
* Enable core API variables to be accessed as function calls?
*
* Benefits are better type hinting, always in scope, and potentially shorter API calls.
* See the file /wire/core/FunctionsAPI.php for details on these functions.
*
* @var bool
*
*/
$config->useFunctionsAPI = false;
/**
* Enable use of front-end markup regions?
*
* When enabled, HTML elements with an "id" attribute that are output before the opening
* `` or `` tag can replace elements in the document that have the same id.
* Also supports append, prepend, replace, remove, before and after options.
*
* @var bool
*
*/
$config->useMarkupRegions = false;
/**
* Use custom page classes? Specify boolean true to enable.
*
* When enabled, if a class with name "[TemplateName]Page" (in ProcessWire namespace) exists
* in /site/classes/[TemplateName]Page.php, and it extends ProcessWire’s Page class, then the
* Page will be created with that class rather than the default Page class. For instance,
* template “home” would look for a class named “HomePage” and template "blog-post" (or
* "blog_post") would look for a class named “BlogPostPage” (file: BlogPostPage.php).
*
* If you create a file named /site/classes/DefaultPage.php with a DefaultPage class within
* it (that extends Page), then it will be used for all pages that would otherwise use the
* `Page` class.
*
* @var bool|string
* @since 3.0.152
*
*/
$config->usePageClasses = false;
/**
* Disable all HTTPS requirements?
*
* Use this option only for development or staging environments, on sites where you are
* otherwise requiring HTTPS. By setting this option to something other than false, you
* can disable any HTTPS requirements specified per-template, enabling you to use your
* site without SSL during development or staging, etc.
*
* The following options are available:
* - boolean true: Disable HTTPS requirements globally
* - string containing hostname: Disable HTTPS requirements only for specified hostname.
* - array containing hostnames: Disable HTTPS requirements for specified hostnames.
*
* @var bool|string|array
*
*/
$config->noHTTPS = false;
/*** 2. DATES & TIMES *************************************************************************/
/**
* Default time zone
*
* Must be a [PHP timezone string](http://php.net/manual/en/timezones.php)
*
* #input timezone
* @var string
*
*/
$config->timezone = 'America/New_York';
/**
* System date format
*
* Default system date format. Preferably in a format that is string sortable.
*
* #notes This should be a [PHP date string](http://www.php.net/manual/en/function.date.php).
*
* @var string
*
*/
$config->dateFormat = 'Y-m-d H:i:s';
/*** 3. SESSION *********************************************************************************/
/**
* Session name
*
* Default session name as used in session cookie. You may wish to change this if running
* multiple ProcessWire installations on the same server. By giving each installation a unique
* session name, you can stay logged into multiple installations at once.
*
* #notes Note that changing this will automatically logout any current sessions.
* @var string
*
*/
$config->sessionName = 'wire';
/**
* Session name when on HTTPS
*
* Same as session name but when on HTTPS. This is only used when the sessionCookieSecure
* option is enabled (default). When blank (default), it will be sessionName + 's'.
*
* @var string
*
*/
$config->sessionNameSecure = '';
/**
* Session expiration seconds
*
* How many seconds of inactivity before session expires
*
* @var int
*
*/
$config->sessionExpireSeconds = 86400;
/**
* Are sessions allowed?
*
* Use this to determine at runtime whether or not a session is allowed for the current request.
* Otherwise, this should always be boolean TRUE. When using this option, we recommend
* providing a callable function like below. Make sure that you put in some logic to enable
* sessions on admin pages at minimum. The callable function receives a single $wire argument
* which is the ProcessWire instance.
*
* Note that the API is not fully ready when this function is called, so the current $page and
* the current $user are not yet known, nor is the $input API variable available.
*
* Also note that if anything in the request calls upon $session->CSRF, then a session is
* automatically enabled.
*
* ~~~~~
* $config->sessionAllow = function($session) {
*
* // if there is a session cookie, a session is likely already in use so keep it going
* if($session->hasCookie()) return true;
*
* // if URL is an admin URL, allow session (replace /processwire/ with your admin URL)
* if(strpos($_SERVER['REQUEST_URI'], '/processwire/) === 0) return true;
*
* // otherwise disallow session
* return false;
* };
* ~~~~~
*
* @var bool|callable Should be boolean, or callable that returns boolean.
*
*/
$config->sessionAllow = true;
/**
* Use session challenge?
*
* Should login sessions have a challenge key? (for extra security, recommended)
*
* @var bool
*
*/
$config->sessionChallenge = true;
/**
* Use session fingerprint?
*
* Should login sessions also be tied to a fingerprint of the browser?
* Fingerprinting can be based upon browser-specific headers and/or
* IP addresses. But note that IP fingerprinting will be problematic on
* dynamic IPs.
*
* Predefined settings:
*
* - 0 or false: Fingerprint off
* - 1 or true: Fingerprint on with default setting (remote IP & useragent)
*
* Custom settings:
*
* - 2: Remote IP
* - 4: Forwarded/client IP (can be spoofed)
* - 8: Useragent
* - 16: Accept header
*
* To use the custom settings above, select one or more of those you want
* to fingerprint, note the numbers, and use them like in the examples:
* ~~~~~~
* // to fingerprint just remote IP
* $config->sessionFingerprint = 2;
*
* // to fingerprint remote IP and useragent:
* $config->sessionFingerprint = 2 | 8;
*
* // to fingerprint remote IP, useragent and accept header:
* $config->sessionFingerprint = 2 | 8 | 16;
* ~~~~~~
*
* If using fingerprint in an environment where the user’s IP address may
* change during the session, you should fingerprint only the useragent
* and/or accept header, or disable fingerprinting.
*
* If using fingerprint with an AWS load balancer, you should use one of
* the options that uses the “client IP” rather than the “remote IP”,
* fingerprint only useragent and/or accept header, or disable fingerprinting.
*
* @var int
*
*/
$config->sessionFingerprint = 1;
/**
* Force current session IP address (overriding auto-detect)
*
* This overrides the return value of `$session->getIP()` method.
* Use this property only for setting the IP address. To get the IP address
* always use the `$session->getIP()` method instead.
*
* This is useful if you are in an environment where the remote IP address
* comes from some property other than the REMOTE_ADDR in $_SERVER. For instance,
* if you are using a load balancer, what’s usually detected as the IP address is
* actually the IP address between the load balancer and the server, rather than
* the client IP address. So in that case, you’d want to set this property as
* follows:
* ~~~~~
* $config->sessionForceIP = $_SERVER['HTTP_X_FORWARDED_FOR'];
* ~~~~~
* If you don’t have a specific need to override the IP address of the user
* then you should leave this blank.
*
* @var string
*
*/
$config->sessionForceIP = '';
/**
* Use secure cookies when on HTTPS?
*
* When enabled, separate sessions will be maintained for
* HTTP vs. HTTPS. This ensures the session is secure on HTTPS.
* The tradeoff is that switching between HTTP and HTTPS means
* that you may be logged in on one and not the other.
*
* 0 or false: secure cookies off
* 1 or true: secure cookies on (default)
*
* @var int
*
*/
$config->sessionCookieSecure = 1;
/**
* Cookie domain for sessions
*
* Enables a session to traverse multiple subdomains.
* Specify a string having “.domain.com” (with leading period) or NULL to disable (default/recommended).
*
* @var string|null
*
*/
$config->sessionCookieDomain = null;
/**
* Number of session history entries to record.
*
* When enabled (with a value > 0) a history of pageviews will be recorded in the
* session. These can be retrieved with $session->getHistory().
*
* @var int
*
*/
$config->sessionHistory = 0;
/**
* Hash method to use for passwords.
*
* Can be any available with your PHP's hash() installation. For instance, you may prefer
* to use something like sha256 if supported by your PHP installation.
*
* @deprecated Only here for backwards compatibility.
*
*/
$config->userAuthHashType = 'sha1';
/**
* Names (string) or IDs (int) of roles that are not allowed to login
*
* Note that you must create these roles yourself in the admin. When a user has
* one of these named roles, $session->login() will not accept a login from them.
* This affects the admin login form and any other login forms that use ProcessWire’s
* session system.
*
* The default value specifies a role name of "login-disabled", meaning if you create
* a role with that name, and assign it to a user, that user will no longer be able
* to login.
*
* @var array
*
*/
$config->loginDisabledRoles = array(
'login-disabled'
);
/*** 4. TEMPLATE FILES **************************************************************************/
/**
* Allow template files to be compiled?
*
* Set to false do disable the option for compiled template files.
* When set to true, it will be used unless a given template's 'compile' option is set to 0.
* This setting also covers system status files like /site/ready.php, /site/init.php, etc. (3.0.142+)
*
* @var bool
*
*/
$config->templateCompile = strlen(__NAMESPACE__) > 0;
/**
* Prepend template file
*
* PHP file in /site/templates/ that will be loaded before each page's template file.
*
* #notes Example: _init.php
* @var string
*
*/
$config->prependTemplateFile = '';
/**
* Append template file
*
* PHP file in /site/templates/ that will be loaded after each page's template file.
*
* #notes Example: _main.php
* @var string
*
*/
$config->appendTemplateFile = '';
/**
* Regular expression to ignore template files
*
* When checking for new template files, files matching this PCRE regex will be ignored.
*
* #notes The default setting of /^_/ ignores all files that begin with an underscore.
* @var string
*
*/
$config->ignoreTemplateFileRegex = '/^_/';
/**
* Expected extension for template files (we don't recommend changing this)
*
*/
$config->templateExtension = 'php';
/*** 5. FILES & ASSETS ************************************************************************/
/**
* Directory mode
*
* Octal string permissions assigned to directories created by ProcessWire.
* Please avoid 0777 if at all possible as that is too open for most installations.
* Note that changing this does not change permissions for existing directories,
* only newly created directories.
*
* #notes See [chmod man page](http://ss64.com/bash/chmod.html).
* #pattern /^0[0-9]{3}$/
* @var string
*
*/
$config->chmodDir = "0755";
/**
* File mode
*
* Octal string permissions assigned to files created by ProcessWire.
* Please avoid 0666 if at all possible as that is too open for most installations.
* Note that changing this does not change permissions for existing files, only newly
* created/uploaded files.
*
* #notes See [chmod man page](http://ss64.com/bash/chmod.html).
* #pattern /^0[0-9]{3}$/
* @var string
*
*/
$config->chmodFile = "0644";
/**
* Set this to false if you want to suppress warnings about 0666/0777 permissions that are too open
*
* @var bool
*
*/
$config->chmodWarn = true;
/**
* Bad file extensions for uploads
*
* File extensions that are always disallowed from uploads (each separated by a space).
*
* @var string
*
*/
$config->uploadBadExtensions = 'php php3 phtml exe cfm shtml asp pl cgi sh vbs jsp';
/**
* Secure page files?
*
* When, true, prevents http access to file assets of access protected pages.
*
* Set to true if you want files on non-public or unpublished pages to be
* protected from direct URL access.
*
* When used, such files will be delivered at a URL that is protected from public access.
*
* @var bool
*
*/
$config->pagefileSecure = false;
/**
* String that prefixes filenames in PW URLs, becoming a shortcut to a page's file's URL
*
* This must be at the end of the URL. For the prefix "-/", a files URL would look like this:
* /path/to/page/-/filename.jpg => same as: /site/assets/files/123/filename.jpg
*
* This should be a prefix that is not the same as any page name, as it takes precedence.
*
* This prefix is deprecated. Insert this into your /site/config.php as a temporary fix only if you
* have broken images from tags placed in textarea fields.
*
* @deprecated
*
* $config->pagefileUrlPrefix = '-/';
*
*/
/**
* Prefix for secure page files
*
* One or more characters prefixed to the pathname of secured file dirs.
*
* If use of this feature originated with a pre-2.3 install, this may need to be
* specified as "." rather than "-".
*
*/
$config->pagefileSecurePathPrefix = '-';
/**
* Use extended file mapping?
*
* Enable this if you expect to have >30000 pages in your site.
*
* Set to true in /site/config.php if you want files to live in an extended path mapping system
* that limits the number of directories per path to under 2000.
*
* Use this on large sites living on file systems with hard limits on quantity of directories
* allowed per directory level. For example, ext2 and its 30000 directory limit.
*
* Please note that for existing sites, this applies only for new pages created from this
* point forward.
*
* #notes Warning: The extended file mapping feature is not yet widely tested, so consider it beta.
* @var bool
*
*/
$config->pagefileExtendedPaths = false;
/**
* Allowed content types for output by template files
*
* When one of these options is selected for a template, the header will be sent
* automatically regardless of whether request is live or cached.
*
* The keys of the array are file extensions. They are used for identification
* and storage purposes. In ProCache, they are used as a file extension which
* connects a configured Apache MIME type to the appropriate content type header.
*
* @var array
*
*/
$config->contentTypes = array(
'html' => 'text/html',
'txt' => 'text/plain',
'json' => 'application/json',
'xml' => 'application/xml',
);
/**
* File content types
*
* Connects file extentions to content-type headers, used by file passthru functions.
*
* Any content types that should be force-download should be preceded with a plus sign.
* The '?' index must be present to represent a default for all not present.
*
* @var array
*
*/
$config->fileContentTypes = array(
'?' => '+application/octet-stream',
'txt' => '+text/plain',
'csv' => '+text/csv',
'pdf' => '+application/pdf',
'doc' => '+application/msword',
'docx' => '+application/vnd.openxmlformats-officedocument.wordprocessingml.document',
'xls' => '+application/vnd.ms-excel',
'xlsx' => '+application/vnd.openxmlformats-officedocument.spreadsheetml.sheet',
'ppt' => '+application/vnd.ms-powerpoint',
'pptx' => '+application/vnd.openxmlformats-officedocument.presentationml.presentation',
'rtf' => '+application/rtf',
'gif' => 'image/gif',
'jpg' => 'image/jpeg',
'jpeg' => 'image/jpeg',
'png' => 'image/png',
'svg' => 'image/svg+xml',
'webp' => 'image/webp',
'zip' => '+application/zip',
'mp3' => 'audio/mpeg',
);
/**
* Named predefined image sizes and options
*
* Specify associative arrays of predefined image sizes indexed by name.
* Each item should have at least 'width' and 'height' indexes. But they can also have any
* other option accepted by the `Pageimage::size()` method `$options` argument.
*
* You can use your defined sizes by name in a Pageimage::size() call by specifying the
* size name rather than the `$width` argument, like this:
* ~~~~~~
* $image = $page->images->first();
* $landscape = $image->size('landscape');
* echo "";
* ~~~~~~
* Feel free to completely overwrite the default $config->imageSizes in your /site/config.php
* file * as this particular setting is not used by the core.
*
* @var array
* @since 3.0.151
*
*/
$config->imageSizes = array(
// Example 1: Landscape (try this one if you want to test the feature)
'landscape' => array('width' => 600, 'height' => 300),
// Example 2: Thumbnails in admin (260 height, proportional width)
// 'admin' => array('width' => 0, 'height' => 260),
// Example 3: Portrait, with additional options:
// 'portrait' => array('width' => 300, 'height' => 500, 'quality' => 80, 'suffix' => 'portrait'),
// Example 4: Square size cropping towards (preserving) top/center (north):
// 'squareNorth' => array('width' => 400, 'height' => 400, 'cropping' => 'north'),
);
/**
* Image sizer options
*
* Default ImageSizer options, as used by $page->image->size(w, h), for example.
*
* #property bool upscaling Upscale if necessary to reach target size? (1=true, 0=false)
* #property bool cropping Crop if necessary to reach target size? (1=true, 0=false)
* #property bool autoRotation Automatically correct orientation? (1=true, 0=false)
* #property bool interlace Use interlaced JPEGs by default? Recommended. (1=true, 0=false)
* #property string sharpening Sharpening mode, enter one of: none, soft, medium, strong
* #property int quality Image quality, enter a value between 1 and 100, where 100 is highest quality (and largest files)
* #property float defaultGamma Default gamma of 0.5 to 4.0 or -1 to disable gamma correction (default=2.0)
* #property bool webpAdd Create a WEBP copy with every new image variation? (default=false)
*
* @var array
*
*/
$config->imageSizerOptions = array(
'upscaling' => true, // upscale if necessary to reach target size?
'cropping' => true, // crop if necessary to reach target size?
'autoRotation' => true, // automatically correct orientation?
'interlace' => false, // use interlaced JPEGs by default? (recommended)
'sharpening' => 'soft', // sharpening: none | soft | medium | strong
'quality' => 90, // quality: 1-100 where higher is better but bigger
'hidpiQuality' => 60, // Same as above quality setting, but specific to hidpi images
'defaultGamma' => 2.0, // defaultGamma: 0.5 to 4.0 or -1 to disable gamma correction (default=2.0)
'webpAdd' => false, // set this to true, if the imagesizer engines should create a Webp copy with every (new) image variation
);
/**
* Options for webp images
*
* #property int quality Quality setting where 1-100 where higher is better but bigger
* #property bool useSrcExt Use source file extension in webp filename? (file.jpg.webp rather than file.webp)
* #property bool useSrcUrlOnSize Fallback to source file URL when webp file is larger than source?
* #property bool useSrcUrlOnFail Fallback to source file URL when webp file fails for some reason?
*
* @var array
*
*/
$config->webpOptions = array(
'quality' => 90, // Quality setting of 1-100 where higher is better but bigger
'useSrcExt' => false, // Use source file extension in webp filename? (file.jpg.webp rather than file.webp)
'useSrcUrlOnSize' => true, // Fallback to source file URL when webp file is larger than source?
'useSrcUrlOnFail' => true, // Fallback to source file URL when webp file fails for some reason?
);
/**
* Admin thumbnail image options
*
* Controls the output of the thumbnail images used in image fields presented in the admin.
*
* #property int width Width of thumbnails or 0 for proportional to height (default=0).
* #property int height Height of thumbnails or 0 for proportional to width (default=100).
* #property float scale Width/height scale (1=auto detect, 0.5=always hidpi, 1.0=force non-hidpi)
* #property bool upscaling Upscale if necessary to reach target size? (1=true, 0=false).
* #property bool cropping Crop if necessary to reach target size? (1=true, 0=false).
* #property bool autoRotation Automatically correct orientation? (1=true, 0=false).
* #property string sharpening Sharpening mode, enter one of: none, soft, medium, strong (default=soft).
* #property int quality Image quality, enter a value between 1 and 100, where 100 is highest quality, and largest files (default=90).
* #property string suffix Suffix to append to all thumbnail images (1-word of a-z 0-9, default=blank)
*
* @var array
*
*/
$config->adminThumbOptions = array(
'width' => 0, // max width of admin thumbnail or 0 for proportional to height (@deprecated, for legacy use)
'height' => 100, // max height of admin thumbnail or 0 for proportional to width (@deprecated, for legacy use)
'gridSize' => 130, // Squared grid size for images (replaces the 'width' and 'height' settings)
'scale' => 1, // admin thumb scale (1=allow hidpi, 0.5=always hidpi, 1.0=force non-hidpi)
'upscaling' => false,
'cropping' => true,
'autoRotation' => true, // automatically correct orientation?
'sharpening' => 'soft', // sharpening: none | soft | medium | strong
'quality' => 90,
'suffix' => '',
);
/**
* File compiler options (as used by FileCompiler class)
*
* Enables modification of file compiler behaviors. See also $config->moduleCompile
* and $config->templateCompile settings.
*
* #property bool siteOnly Specify true to prevent compiler from attempting compilation outside files in /site/ (default=false).
* #property bool showNotices Show notices in admin about compiled files to superuser when logged in (default=true).
* #property bool logNotices Log notices about compiled files and maintenance to file-compiler.txt log (default=true).
* #property string chmodFile Mode to use for created files, i.e. "0644" (uses $config->chmodFile setting by default).
* #property string chmodDir Mode to use for created dirs, i.e. "0755" (uses $config->chmodDir setting by default).
* #property array exclusions Exclude paths that exist within any of these paths (default includes $config->paths->wire).
* #property array extensions File extensions that we compile (default=php, module, inc).
* #property string cachePath Path where compiled files are stored (default is $config->paths->cache . 'FileCompiler/')
*
* @var array
*
*/
$config->fileCompilerOptions = array(
'siteOnly' => false, // only allow compilation of files in /site/ directory
'showNotices' => true, // show notices about compiled files to superuser when logged in
'logNotices' => true, // log notices about compiled files and maintenance to file-compiler.txt log.
'chmodFile' => '', // mode to use for created files, i.e. "0644"
'chmodDir' => '', // mode to use for created directories, i.e. "0755"
'exclusions' => array(), // exclude filenames or paths that start with any of these
'extensions' => array('php', 'module', 'inc'), // file extensions we compile
'cachePath' => $config->paths->cache . 'FileCompiler/', // path where compiled files are stored
);
/**
* Temporary directory for uploads
*
* Optionally override PHP's upload_tmp_dir with your own.
*
* @var string
*
* $config->uploadTmpDir = dirname(__FILE__) . '/assets/uploads/'; // example
*
*/
/*** 6. HTTP & INPUT **************************************************************************/
/**
* HTTP hosts
*
* For added security, specify the host names ProcessWire should recognize.
*
* If your site may be accessed from multiple hostnames, you'll also want to use this setting.
* If left empty, the httpHost will be determined automatically, but use of this whitelist
* is recommended for production environments.
*
* If your hostname uses a port other than 80, make sure to include that as well.
* For instance "localhost:8888".
*
* @var array
*
*/
$config->httpHosts = array();
/**
* Runtime HTTP host
*
* This is set automatically by ProcessWire at runtime, consisting of one of the values
* specified in $config->httpHosts. However, if you set a value for this, it will override
* ProcessWire's runtime value.
*
*/
$config->httpHost = '';
/**
* Protect CSRF?
*
* Enables CSRF (cross site request forgery) protection on all PW forms, recommended for improved security.
*
* @var bool
*
*/
$config->protectCSRF = true;
/**
* Maximum URL segments
*
* Maximum number of extra stacked URL segments allowed in a page's URL (including page numbers).
*
* i.e. /path/to/page/s1/s2/s3 where s1, s2 and s3 are URL segments that don't resolve to a page, but can be
* checked in the API via $input->urlSegment1, $input->urlSegment2, $input->urlSegment3, etc.
* To use this, your template settings (under the URL tab) must take advantage of it. Only change this
* number if you need more (or fewer) URL segments for some reason.
*
* @var int
*
*/
$config->maxUrlSegments = 4;
/**
* Maximum length for any individual URL segment (default=128)
*
* @var int
*
*/
$config->maxUrlSegmentLength = 128;
/**
* Maximum URL/path slashes (depth) for request URLs
*
* The maximum number of slashes that any path requested from ProcessWire may have.
* Maximum possible value is 60. Minimum recommended value is 10.
*
* @var int
*
*/
$config->maxUrlDepth = 30;
/**
* Pagination URL prefix
*
* Default prefix used for pagination, i.e. "page2", "page3", etc.
*
* If using multi-language page names, please use the setting in LanguageSupportPageNames module settings instead.
*
* @var string
*
*/
$config->pageNumUrlPrefix = 'page';
/**
* Multiple prefixes that may be used for detecting pagination
*
* Typically used for multi-language support and populated automatically at runtime by
* multi-language support modules. When populated, they override $config->pageNumUrlPrefix.
*
* @internal
*
* $config->pageNumUrlPrefixes = array();
*
*/
/**
* Character set for page names
*
* Set to 'UTF8' (uppercase) to allow for non-ascii word characters in page names.
* You must also update the .htaccess file to allow non-ascii characters through.
* See also $config->pageNameWhitelist, which is used if pageNameCharset is UTF8.
*
* @var string
*
* #notes Value may be either 'ascii' (lowercase) or 'UTF8' (uppercase).
*
*/
$config->pageNameCharset = 'ascii';
/**
* If 'pageNameCharset' is 'UTF8' then specify the whitelist of allowed characters here
*
* To allow any characters, you can make this blank, however using a whitelist is strongly recommended.
* Please note this whitelist is only used if pageNameCharset is 'UTF8'.
*
* @var string
*
*/
$config->pageNameWhitelist = '-_.abcdefghijklmnopqrstuvwxyz0123456789æåäßöüđжхцчшщюяàáâèéëêěìíïîõòóôøùúûůñçčćďĺľńňŕřšťýžабвгдеёзийклмнопрстуфыэęąśłżź';
/**
* Name to use for untitled pages
*
* When page has this name, the name will be changed automatically (to a field like title) when it is possible to do so.
*
* @var string
*
*/
$config->pageNameUntitled = "untitled";
/**
* Maximum paginations
*
* Maxmum number of supported paginations when using page numbers.
*
* @var int
*
*/
$config->maxPageNum = 999;
/**
* Input variable order
*
* Order that variables with the $input API var are handled when you access $input->some_var.
*
* This does not affect the dedicated $input->[get|post|cookie|whitelist] variables/functions.
* To disable $input->some_var from considering get/post/cookie, make this blank.
*
* #notes Possible values are a combination of: "get post cookie whitelist" in any order, separated by 1 space.
*
* @var string
*
*/
$config->wireInputOrder = 'get post';
/**
* Lazy-load get/post/cookie input into $input API var?
*
* This is an experimental option for reduced memory usage when a lot of input data is present.
*
* This prevents PW from keeping separate copies of get/post/cookie data, and it instead works
* directly from the PHP $_GET, $_POST and $_COOKIE vars.
*
* This option is also useful in that anything you SET to PW’s $input->get/post/cookie also gets
* set to the equivalent PHP $_GET, $_POST and $_COOKIE.
*
* @var bool
*
*/
$config->wireInputLazy = false;
/**
* Options for setting cookies from $input->cookie()->set(...)
*
* Additional details about some of these options can also be found on PHP’s [setcookie](https://www.php.net/manual/en/function.setcookie.php) doc page.
*
* #property int age Max age of cookies in seconds or 0 to expire with session (3600=1hr, 86400=1day, 604800=1week, 2592000=30days, etc.)
* #property string|null Cookie path or null for PW installation’s root URL (default=null).
* #property string|null|bool domain Cookie domain: null for current hostname, true for all subdomains of current domain, domain.com for domain and all subdomains, www.domain.com for www subdomain.
* #property bool|null secure Transmit cookies only over secure HTTPS connection? (true, false, or null to auto-detect, using true option for cookies set when HTTPS is active).
* #property bool httponly When true, cookie is http/server-side and not visible to JS code in most browsers.
*
* @var array
* @since 3.0.141
*
*/
$config->cookieOptions = array(
'age' => 604800, // Max age of cookies in seconds or 0 to expire with session (3600=1hr, 86400=1day, 604800=1week, 2592000=30days, etc.)
'path' => null, // Cookie path/URL or null for PW installation’s root URL (default=null).
'domain' => null, // Cookie domain: null for current hostname, true for all subdomains of current domain, domain.com for domain and all subdomains, www.domain.com for www subdomain.
'secure' => null, // Transmit cookies only over secure HTTPS connection? (true, false, or null to auto-detect, substituting true for cookies set when HTTPS is active).
'httponly' => false, // When true, cookie is http/server-side only and not visible to client-side JS code.
'fallback' => true, // If set cookie fails (perhaps due to output already sent), attempt to set at beginning of next request? (default=true)
);
/*** 7. DATABASE ********************************************************************************/
/**
* Database name
*
*/
$config->dbName = '';
/**
* Database username
*
*/
$config->dbUser = '';
/**
* Database password
*
*/
$config->dbPass = '';
/**
* Database host
*
*/
$config->dbHost = '';
/**
* Database port
*
*/
$config->dbPort = 3306;
/**
* Database character set
*
* utf8 is the only recommended value for this.
*
* Note that you should probably not add/change this on an existing site. i.e. don't add this to
* an existing ProcessWire installation without asking how in the ProcessWire forums.
*
*/
$config->dbCharset = 'utf8';
/**
* Database engine
*
* May be 'InnoDB' or 'MyISAM'. Avoid changing this after install.
*
*/
$config->dbEngine = 'MyISAM';
/**
* Allow MySQL query caching?
*
* Set to false to to disable query caching. This will make everything run slower so should
* only used for DB debugging purposes.
*
* @var bool
*
*/
$config->dbCache = true;
/**
* MySQL database exec path
*
* Path to mysql/mysqldump commands on the file system
*
* This enables faster backups and imports when available.
*
* Example: /usr/bin/
* Example: /Applications/MAMP/Library/bin/
*
* @param string
*
*/
$config->dbPath = '';
/**
* Force lowercase tables?
*
* Force any created field_* tables to be lowercase.
* Recommend value is true except for existing installations that already have mixed case tables.
*
*/
$config->dbLowercaseTables = true;
/**
* Database init command (PDO::MYSQL_ATTR_INIT_COMMAND)
*
* Note: Placeholder "{charset}" gets automatically replaced with $config->dbCharset.
*
* @var string
*
*/
$config->dbInitCommand = "SET NAMES '{charset}'";
/**
* Set or adjust SQL mode per MySQL version
*
* Array indexes are minimum MySQL version mode applies to. Array values are
* the names of the mode(s) to apply. If value is preceded with "remove:" the mode will
* be removed, or if preceded with "add:" the mode will be added. If neither is present
* then the mode will be set exactly as given. To specify more than one SQL mode for the
* value, separate them by commas (CSV). To specify multiple statements for the same
* version, separate them with a slash "/".
*
* ~~~~~
* array("5.7.0" => "remove:STRICT_TRANS_TABLES,ONLY_FULL_GROUP_BY/add:NO_ZERO_DATE")
* ~~~~~
*
* @var array
*
*/
$config->dbSqlModes = array(
"5.7.0" => "remove:STRICT_TRANS_TABLES,ONLY_FULL_GROUP_BY"
);
/**
* A key=>value array of any additional driver-specific connection options.
*
* @var array
*
*/
$config->dbOptions = array();
/**
* Optional DB socket config for sites that need it (for most you should exclude this)
*
* @var string
*
*/
$config->dbSocket = '';
/**
* Maximum number of queries WireDatabasePDO will log in memory (when $config->debug is enabled)
*
* @var int
*
*/
$config->dbQueryLogMax = 500;
/**
* Remove 4-byte characters (like emoji) when dbEngine is not utf8mb4?
*
* When charset is not “utf8mb4” and this value is true, 4-byte UTF-8 characters are stripped
* out of inserted values when possible. Note that this can add some overhead to INSERTs.
*
* @var bool
*
*/
$config->dbStripMB4 = false;
/*** 8. MODULES *********************************************************************************/
/**
* Use compiled modules?
*
* Set to false to disable the use of compiled modules.
* Set to true to enable PW to compile modules when it determines it is necessary.
* We recommend keeping this set to true unless all modules in use support PW 3.x natively.
*
* @var bool
*
*/
$config->moduleCompile = true;
/**
* Modules service URL
*
* URL to modules directory service JSON feed.
*
* @var string
*
*/
$config->moduleServiceURL = 'https://modules.processwire.com/export-json/';
/**
* Modules service API key
*
* API key for modules directory service.
*
* @var string
*
*/
$config->moduleServiceKey = 'pw301';
/**
* Allowed module installation options (in admin)
*
* Module installation options you want to be available from the admin Modules > Install tab.
* For any of the options below, specify boolean `true` to allow, `false` to disallow, or
* specify string `'debug'` to allow only when ProcessWire is in debug mode.
*
* - `directory`: Allow installation or upgrades from ProcessWire modules directory?
* - `upload`: Allow installation by file upload?
* - `download`: Allow installation by file download from URL?
*
* @todo consider whether the 'directory' option should also be limited to 'debug' only.
*
* @var array
* @since 3.0.163
*
*/
$config->moduleInstall = array(
'directory' => true, // allow install from ProcessWire modules directory?
'upload' => 'debug', // allow install by module file upload?
'download' => 'debug', // allow install by download from URL?
);
/**
* Substitute modules
*
* Names of substitutute modules for when requested module doesn't exist
*
* #notes Specify ModuleName = ReplacementModuleName
* @var array
*
*/
$config->substituteModules = array(
// TinyMCE replaced with CKEditor as default RTE in 2.4.9+
'InputfieldTinyMCE' => 'InputfieldCKEditor'
);
/**
* WireMail module(s) default settings
*
* Note you can add any other properties to the wireMail array that are supported by WireMail settings
* like we’ve done with from, fromName and headers here. Any values set here become defaults for the
* WireMail module.
*
* Blacklist property
* ==================
* The blacklist property lets you specify email addresses, domains, partial host names or regular
* expressions that prevent sending to certain email addresses. This is demonstrated by example:
* ~~~~~
* // Example of blacklist definition
* $config->wireMail('blacklist', [
* 'email@domain.com', // blacklist this email address
* '@host.domain.com', // blacklist all emails ending with @host.domain.com
* '@domain.com', // blacklist all emails ending with @domain.com
* 'domain.com', // blacklist any email address ending with domain.com (would include mydomain.com too).
* '.domain.com', // blacklist any email address at any host off domain.com (domain.com, my.domain.com, but NOT mydomain.com).
* '/something/', // blacklist any email containing "something". PCRE regex assumed when "/" is used as opening/closing delimiter.
* '/.+@really\.bad\.com$/', // another example of using a PCRE regular expression (blocks all "@really.bad.com").
* ]);
*
* // Test out the blacklist
* $email = 'somebody@bad-domain.com';
* $result = $mail->isBlacklistEmail($email, [ 'why' => true ]);
* if($result === false) {
* echo "
Email address is not blacklisted
";
* } else {
* echo "
Email is blacklisted by rule: $result
";
* }
* ~~~~~
*
* #property string module Name of WireMail module to use or blank to auto-detect. (default='')
* #property string from Default from email address, when none provided at runtime. (default=$config->adminEmail)
* #property string fromName Default from name string, when none provided at runtime. (default='')
* #property string newline What to use for newline if different from RFC standard of "\r\n" (optional).
* #property array headers Default additional headers to send in email, key=value. (default=[])
* #property array blacklist Email blacklist addresses or rules. (default=[])
*
* @var array
*
*/
$config->wireMail = array(
'module' => '',
'from' => '',
'fromName' => '',
'headers' => array(),
'blacklist' => array()
);
/**
* PageList default settings
*
* Note that 'limit' and 'speed' can also be overridden in the ProcessPageList module settings.
* The 'useHoverActions' are currently only known compatible with AdminThemeDefault.
*
* #property int limit Number of items to show per pagination (default=50)
* #property int speed Animation speed in ms for opening/closing lists (default=200)
* #property bool useHoverActions Show page actions when page is hovered? (default=false)
* #property int hoverActionDelay Delay in ms between hovering a page and showing the actions (default=100)
* #property int hoverActionFade Time in ms to spend fading in or out the actions (default=100)
*
* @var array
*
*/
$config->pageList = array(
'limit' => 50,
'speed' => 200,
'useHoverActions' => true,
'hoverActionDelay' => 100,
'hoverActionFade' => 100
);
/**
* PageEdit default settings
*
* #property bool viewNew Specify true to force the "view" link to open pages in a new window.
* #property bool confirm Notify user if they attempt to navigate away from unsaved changes?
* #property bool ajaxChildren Whether to load the 'children' tab via ajax
* #property bool ajaxParent Whether to load the 'parent' field via ajax
* #property bool editCrumbs Whether or not breadcrumbs load page editor (false=load page list).
*
* @var array
*
*/
$config->pageEdit = array(
'viewNew' => false,
'confirm' => true,
'ajaxChildren' => true,
'ajaxParent' => true,
'editCrumbs' => false,
);
/**
* PageAdd default settings
*
* #property string noSuggestTemplates Disable suggestions for new pages (1=disable all, or specify template names separated by space)
*
*/
$config->pageAdd = array(
'noSuggestTemplates' => '',
);
/**
* MarkupQA (markup quality assurance) optional settings
*
* This is used by Textarea Fieldtype when enabled and using content-type HTML.
*
* #property array ignorePaths Paths that begin with any of these will be ignored and left alone (not abstracted), i.e. [ '/a/b/', '/c/d/' ]
* #property bool debug Show debugging info to superusers? (default=false). May also be specified in $config->debugMarkupQA.
*
* @var array
*
*/
$config->markupQA = array(
// 'ignorePaths' => [ "/some/path/", "/another/path/", "/and/so/on/" ],
// 'debug' => true,
);
/*** 9. MISC ************************************************************************************/
/**
* Additional core logs
*
* All activities from the API functions corresponding with the given log names will be logged.
* Options that can be specified are: pages, fields, templates, modules, exceptions, deprecated.
*
* Use log "deprecated" to log deprecated calls (during development only).
*
* @var array
*
*/
$config->logs = array(
'modules',
'exceptions',
);
/**
* Include IP address in logs, when applicable?
*
* @var bool
*
*/
$config->logIP = false;
/**
* Default admin theme
*
* Module name of default admin theme for guest and users that haven't already selected one
*
* Core options include: **AdminThemeDefault** or **AdminThemeReno** or **AdminThemeUikit**.
* Additional options will depend on what other 3rd party AdminTheme modules you have installed.
*
* @var string
*
*/
$config->defaultAdminTheme = 'AdminThemeDefault';
/**
* Admin email address
*
* Optional email address to send fatal error notifications to.
*
* #input email
* @var string
*
*/
$config->adminEmail = '';
/**
* Fatal error HTML
*
* HTML used for fatal error messages in HTTP mode.
*
* This should use inline styles since no guarantee stylesheets are present when these are displayed.
* String should contain two placeholders: {message} and {why}
*
* #input textarea
* @var string
*
*/
$config->fatalErrorHTML = "
{message}
{why}
";
/**
* HTTP code to send for fatal error (typically 500 or 503)
*
* @var int
* @since 3.0.151
*
*/
$config->fatalErrorCode = 500;
/**
* Settings for modal windows
*
* Most PW modals use the "large" setting. The comma separated dimensions represent:
*
* 1. Start at pixels from top
* 2. Start at pixels from left
* 3. Width: 100% minus this many pixels
* 4. Height: 100% minus this many pixels
*
* Following that you may optionally specify any of the following, in any order.
* They must continue to be in CSV format, i.e. "key=value,key=value,key=value".
*
* 5. modal=true (whether dialog will have modal behavior, specify false to disable)
* 6. draggable=false (whether dialog is draggable, specify true to enable)*
* 7. resizable=true (whether dialog is resizable, specify false to disable)
* 8. hideOverflow=true (whether overflow in parent should be hidden, specify false to disable)
* 9. hide=250 (number of ms to fade out window after closing, default=250)
* 10. show=100 (number of ms to fade in window when opening, default=100)
* 11. closeOnEscape=false (whether hitting the ESC key should close the window, specify true to enable)
*
* The "large" modal option below demonstrates a few of these.
*
* *Note the draggable option does not work well unless the modal will open at the top of the
* page. Do not use on modals that may be triggered further down the page.
*
* @var array
* #property string large Settings for large modal windows (most common)
* #property string medium Settings for medium modal windows
* #property string small Settings for small modal windows
* #property string full Settings for full-screen modal windows
*
*/
$config->modals = array(
'large' => "15,15,30,30,draggable=false,resizable=true,hide=250,show=100",
'medium' => "50,49,100,100",
'small' => "100,100,200,200",
'full' => "0,0,0,0",
);
/**
* Cache names to preload
*
* Consists of the cache name/token for any caches that we want to be preloaded at boot time.
* This is an optimization that can reduce some database overhead.
*
* @var array
*
*/
$config->preloadCacheNames = array(
'Modules.info',
//'ModulesVerbose.info',
'ModulesVersions.info',
'Modules.wire/modules/',
'Modules.site/modules/',
);
/**
* Allow Exceptions to propagate?
*
* When true, ProcessWire will not capture Exceptions and will instead let them fall
* through in their original state. Use only if you are running ProcessWire with your
* own Exception handler. Most installations should leave this at false.
*
* @var bool
*
*/
$config->allowExceptions = false;
/**
* X-Powered-By header behavior
*
* - true: Sends the generic PW header, replacing any other powered-by headers (recommended).
* - false: Sends blank powered-by, replacing any other powered-by headers.
* - null: Sends no powered-by, existing server powered-by headers will pass through.
*
* @var bool|null
*
*/
$config->usePoweredBy = true;
/**
* Chunk size for lazy-loaded pages used by $pages->findMany()
*
* @var int
*
*/
$config->lazyPageChunkSize = 250;
/**
* Settings specific to InputfieldWrapper class
*
* Setting useDependencies to false may enable to use depencencies in some places where
* they aren't currently supported, like files/images and repeaters. Note that setting it
* to false only disables it server-side. The javascript dependencies work either way.
*
* Uncomment and paste into /site/config.php if you want to use this
*
* $config->InputfieldWrapper = array(
* 'useDependencies' => true,
* 'requiredLabel' => 'Missing required value',
* 'columnWidthSpacing' => 0,
* );
*
*/
/**
* statusFiles: Optional automatic include files when ProcessWire reaches each status/state
*
* **Using status/state files:**
*
* - These files must be located in your /site/ directory, i.e. /site/ready.php.
* - If a file does not exist, PW will see that and ignore it.
* - For any state/status files that you don’t need, it is preferable to make them
* blank or remove them, so that PW does not have to check if the file exists.
* - It is also preferable that included files have the ProcessWire namespace, and it is
* required that a `boot` file (if used) have the Processwire namespace.
* - The `init` and `ready` status files are called *after* autoload modules have had their
* corresponding methods (init or ready) called. Use `_init` or `_ready` (with leading
* underscore) as the keys to specify files that should instead be called *before* the state.
* - While php files in /site/ are blocked from direct access by the .htaccess file, it’s
* also a good idea to add `if(!defined("PROCESSWIRE")) die();` at the top of them.
*
* **Status files and available API variables:**
*
* - Included files receive current available ProcessWire API variables, locally scoped.
* - In the `boot` state, only $wire, $hooks, $config, $classLoader API variables are available.
* - In the `init` state, all core API variables are available, except for $page.
* - In the `ready`, `render`, `download` and `finished` states, all API variables are available.
* - In the `failed` state, an unknown set of API variables is available, so use isset() to check.
*
* **Description of statuses/states:**
*
* The statuses occur in this order:
*
* 1. The `boot` status occurs in the ProcessWire class constructor, after PW has initialized its
* class loader, loaded its config files, and initialized its hooks system. One use for this
* state is to add static hooks to methods that might be executed between boot and init, which
* would be missed by the time the init state is reached.
*
* 2. The `init` status occurs after ProcessWire has loaded all of its core API variables, except
* that the $page API variable has not yet been determined. At this point, all of the autoload
* modules have had their init() methods called as well.
*
* - If you want to target the state right before modules.init() methods are called, (rather
* than after), you can use `initBefore`.
*
* 3. The `ready` status is similar to the init status except that the current Page is now known,
* and the $page API variable is known and available. The ready file is included after autoload
* modules have had their ready() methods called.
*
* - If you want to limit your ready file to just be called for front-end (site) requests,
* you can use `readySite`.
*
* - If you want to limit your ready file to just be called for back-end (admin) requests with
* a logged-in user, you can use `readyAdmin`.
*
* - If you want to target the state right before modules.ready() methods are called, (rather
* than after), you can use `readyBefore`. This is the same as the init state, except that
* the current $page is available.
*
* 4. The `render` status occurs when a page is about to be rendered and the status is retained
* until the page has finished rendering. If using a status file for this, in addition to API
* variables, it will also receive a `$contentType` variable that contains the matched content-
* type header, or it may be blank for text/html content-type, or if not yet known. If externally
* bootstrapped it will contain the value “external”.
*
* 5. The `download` status occurs when a file is about to be sent as a download to the user.
* It occurs *instead* of a render status (rather than in addition to). If using an include file
* for this, in addition to API vars, it will also receive a `$downloadFile` variable containing
* the filename requested to be downloaded (string).
*
* 6. The `finished` status occurs after the request has been delivered and output sent. ProcessWire
* performs various maintenance tasks during this state.
*
* 7. The `failed` status occurs when the request has failed due an Exception being thrown.
* In addition to available API vars, it also receives these variables:
*
* - `$exception` (\Exception): The Exception that triggered the failed status, this is most
* commonly going to be a Wire404Exception, WirePermissionException or WireException.
* - `$reason` (string): Additional text info about error, beyond $exception->getMessage().
* - `$failPage` (Page|NullPage): Page where the error occurred
*
* **Defining status files:**
*
* You can define all of the status files at once using an array like the one this documentation
* is for, but chances are you want to set one or two rather than all of them. You can do so like
* this, after creating /site/boot.php and site/failed.php files (as examples):
* ~~~~~
* $config->statusFiles('boot', 'boot.php');
* $config->statusFiles('failed', 'failed.php');
* ~~~~~
*
* @since 3.0.142
* @var array
*
* #property string boot File to include for 'boot' state.
* #property string init File to include for 'init' state.
* #property string initBefore File to include right before 'init' state, before modules.init().
* #property string ready File to include for API 'ready' state.
* #property string readyBefore File to include right before 'ready'state, before modules.ready().
* #property string readySite File to include for 'ready' state on front-end/site only.
* #property string readyAdmin File to include for 'ready' state on back-end/admin only.
* #property string download File to include for API 'download' state (sending file to user).
* #property string render File to include for the 'render' state (always called before).
* #property string finished File to include for the 'finished' state.
* #property string failed File to include for the 'failed' state.
*
*/
$config->statusFiles = array(
'boot' => '',
'initBefore' => '',
'init' => 'init.php',
'readyBefore' => '',
'ready' => 'ready.php',
'readySite' => '',
'readyAdmin' => '',
'render' => '',
'download' => '',
'finished' => 'finished.php',
'failed' => '',
);
/**
* adminTemplates: Names of templates that ProcessWire should consider exclusive to the admin
*
* @since 3.0.142
* @var array
*
*/
$config->adminTemplates = array('admin');
/*** 10. RUNTIME ********************************************************************************
*
* The following are runtime-only settings and cannot be changed from /site/config.php
*
*/
/**
* https: This is automatically set to TRUE when the request is an HTTPS request, null when not determined.
*
*/
$config->https = null;
/**
* ajax: This is automatically set to TRUE when the request is an AJAX request.
*
*/
$config->ajax = false;
/**
* modal: This is automatically set to TRUE when request is in a modal window.
*
*/
$config->modal = false;
/**
* external: This is automatically set to TRUE when PW is externally bootstrapped.
*
*/
$config->external = false;
/**
* status: Current runtime status (corresponding to ProcessWire::status* constants)
*
*/
$config->status = 0;
/**
* admin: TRUE when current request is for a logged-in user in the admin, FALSE when not, 0 when not yet known
*
* @since 3.0.142
*
*/
$config->admin = 0;
/**
* cli: This is automatically set to TRUE when PW is booted as a command line (non HTTP) script.
*
*/
$config->cli = false;
/**
* version: This is automatically populated with the current PW version string (i.e. 2.5.0)
*
*/
$config->version = '';
/**
* versionName: This is automatically populated with the current PW version name (i.e. 2.5.0 dev)
*
*/
$config->versionName = '';
/**
* column width spacing for inputfields: used by some admin themes to communicate to InputfieldWrapper
*
* Value is null, 0, or 1 or higher. This should be kept at null in this file.
*
* This can also be specified with $config->InputfieldWrapper('columnWidthSpacing', 0); (3.0.158+)
*
*/
$config->inputfieldColumnWidthSpacing = null;
/**
* Populated to contain tags for document head
*
* This is populated only after a MarkupPagerNav::render() has rendered pagination and is
* otherwise null.
*
* $config->pagerHeadTags = '';
*
*/
/*** 11. SYSTEM *********************************************************************************
*
* Values in this section are not meant to be changed
*
*/
$config->rootPageID = 1;
$config->adminRootPageID = 2;
$config->trashPageID = 7;
$config->loginPageID = 23;
$config->http404PageID = 27;
$config->usersPageID = 29;
$config->usersPageIDs = array(29); // if multiple needed
$config->rolesPageID = 30;
$config->externalPageID = 27;
$config->permissionsPageID = 31;
$config->guestUserPageID = 40;
$config->superUserPageID = 41;
$config->guestUserRolePageID = 37;
$config->superUserRolePageID = 38;
$config->userTemplateID = 3;
$config->userTemplateIDs = array(3); // if multiple needed
$config->roleTemplateID = 4;
$config->permissionTemplateID = 5;
/**
* Page IDs that will be preloaded with every request
*
* This reduces number of total number of queries by reducing some on-demand queries
*
*/
$config->preloadPageIDs = array(
1, // root/homepage
2, // admin
28, // access
29, // users
30, // roles
37, // guest user role
38, // super user role
40, // guest user
);
/**
* Unix timestamp of when this ProcessWire installation was installed
*
* This is set in /site/config.php by the installer. It is used for auto-detection
* of when certain behaviors must remain backwards compatible. When this value is 0
* then it is assumed that all behaviors must remain backwards compatible. Once
* established in /site/config.php, this value should not be changed. If your site
* config file does not specify this setting, then you should not add it.
*
*/
$config->installed = 0;