-----------------------------------------------------------------------------------------------------------------
Readme zur SIMEAS P GSD Datei.
Vor Verwendung der GSD Datei bitte sorgfltig lesen
-----------------------------------------------------------------------------------------------------------------
Sehr geehrter Kunde,
SIEMENS stellt Ihnen diese GSD-Datei fr folgende SIMEAS P (7KG7000-8AA) zur Verfgung:
7KG7000-8AA
7KG7100-0AA00-0AA0 (SIMEAS P100)
7KG7200-0AA00-0AA0 (SIMEAS P200)
7KG7500-0AA0x-0AA0 (SIMEAS P500)
7KG7550-0AA0x-0AA0 (SIMEAS P550)
7KG7600-0AA0x-0AA0 (SIMEAS P600)
7KG7650-0AA0x-0AA0 (SIMEAS P650)

Bitte beachten Sie beim Einsatz des SIMEAS P an einer SIMATIC Steuerung folgenden Hinweis:

   Es sind unbedingt die beiden Organisationsbausteine OB85 und OB86 in der SIMATIC einzufgen.
   Diese Bausteine fangen Ereignisse ab die beim Ziehen, Stecken oder im Fehlerfall auftreten knnen.
   Falls einer oder beide Organisationsbausteine fehlen, geht die SIMATIC bei Trennung des SIMEAS P 
   vom Bus oder Ausfall des SIMEAS P in den STOP Zustand.

Jede SPS Ablaufsteuerung stellt unterschiedliche Organisationsbausteine fr Alarm- und Fehlerbehandlung zur Verfgung, die allgemein beschrieben sind und eingesetzt werden. Bei anderen PROFIBUS-DP Mastern ist die Vorgehensweise/Reaktion auf einen DP-Slave Ausfall ggf. anders gelst. Bitte konsultieren Sie das Handbuch Ihres Profibus Masters oder wenden Sie Sich an den Hersteller Ihrer  Mastereinheit, falls Sie hierzu Fragen haben.
SIEMENS kann leider keine Auskunft zu Profibus-DP Mastern geben, die nicht von SIEMENS hergestellt wurden.

Wir haben diese GSD-Datei nach unseren hohen Standards getestet. 
SIEMENS kann jedoch keine Gewhrleistung bernehmen fr Schden, die durch unsachgeme Verwendung dieser Datei entstehen.
-----------------------------------------------------------------------------------------------------------------
Dear Customer,
this GSD file for the following SIMEAS P is placed at your disposal by SIEMENS:
7KG7000-8AA
7KG7100-0AA00-0AA0 (SIMEAS P100)
7KG7200-0AA00-0AA0 (SIMEAS P200)
7KG7500-0AA0x-0AA0 (SIMEAS P500)
7KG7550-0AA0x-0AA0 (SIMEAS P550)
7KG7600-0AA0x-0AA0 (SIMEAS P600)
7KG7650-0AA0x-0AA0 (SIMEAS P650)

When connecting the SIMEAS P to a SIMATIC PLC please observe the following notice:

   Always insert the organization blocks OB85 and OB86 into the SIMATIC PLC.
   These blocks will catch events that may occur when disconnecting or connecting the
   SIMEAS P or if the SIMEAS P should fail. If one or both of these organization blocks are missing,
   the SIMATIC PLC will enter the STOP mode upon occurrence of such an event.

Every PLC provides different general organization blocks to cover alerts and failure events. 
Other Profibus-DP masters may provide other mechanisms to protect against failure of a DP-slave. 
Should you have any questions, please consult the manual of your Profibus-DP master or contact the 
manufacturer of your DP master. SIEMENS can not answer questions concerning Profibus-DP masters not made by SIEMENS.

This GSD file has been tested according to our high standards. 
However, SIEMENS can take no responsibility for any damage caused by improper usage of this file.
-----------------------------------------------------------------------------------------------------------------
(C) November 17th, 2003

SIEMENS AG
Power Transmission and Distribution
Humboldtstrae 59
D-90459 Berlin
Customer Hotline:
Phone: +49 180 524 7000; Fax: +49 180 524 2471
mailto:services@ptd.siemens.de
